experience and expertise in Polyurethane Adhesives for Flexible FOOD Packaging
Texachem takes pride in its extensive experience and expertise. These virtues enable us to provide a wide range of adhesive products tailored to meet the diverse application requirements of professionals in the food packaging industry.
Here, you will find a selection of our most popular products, including solvent-based and solvent-free adhesives, suitable for both general applications and more challenging uses, such as pasteurisation and sterilisation of packaging.
We would like to particularly highlight our portfolio of heat-seal lacquers, renowned for their exceptional adhesions and heat resistance, which ensure long-lasting durability and excellent product quality.
Texachem is confident that our range of adhesive products and heat-seal lacquers will interest and convert industry professionals. We appreciate the opportunity to meet with you and explore potential avenues for collaboration between our companies.
Polyurethane Adhesives For Flexible Packaging
ALL
SOLVENT BASE
SOLVENT FREE
HEAT-SEALABLE LACQUERS
OVERPRINT/PRINTABLE LACQUERS
TEXACOTE SB 214 (OH)
Mix ratio
100
TEXACOTE CR 213 (NCO)
Mix ratio
100
Two-component adhesives with medium thermal resistance. The product has high wettability and low solvent retention, recommended for lamination at high speed.
TEXACOTE SB 275 (NCO)
Mix ratio
100
TEXACOTE CR 203 (OH)
Mix ratio
25
Two-component adhesive system which provides very good wettability and easy drying of solvents. Suitable with film containing high quantity of slip agent.
TEXACOTE SB 251 (NCO)
Mix ratio
100
TEXACOTE CR 209 (OH)
Mix ratio
2,5
Two-component adhesives with high thermal resistance. The resulting laminates can withstand boiling and pasteurisation. Sterilisation is possible only in film/film structures.
TEXACOTE SB 222/70 (OH)
Mix ratio
100
TEXACOTE CR 200 (NCO)
Mix ratio
11,5
Two-components OH solvent-based adhesive system with elevated chemical and thermal resistance. Suggested for PET/ALU structures involved in electrical cable insulation, but can also be used with other different plastic substrates. Adhesive suitable for structures such as PET/ALU, PET/ALU/PE, PET/ALU/CPP and all barrier film structures. The high, non-volatile portion of the system allows high concentration coating and application, including paper.
TEXACOTE SB 203 (NCO)
Mix ratio
100
TEXACOTE CR 203 (OH)
Mix ratio
20
Two-component adhesive system with high wettability of all substrates in film/film, film/ALU and film/metfilm lamination. The resulting laminates are boiling and pasteurisation resistant. Running prior trials for sterilisation applications is recommended. Suitable for hot filling applications.
TEXACOTE SB 205/75 (NCO)
Mix ratio
100
TEXACOTE CR 205 (OH)
Mix ratio
2,5
Two-component adhesive system suitable for pasteurisable, sterilisable/retortable structures. Suitable for lamination of all substrates containing aluminium, metallised and transparent films, owing to its high brightness features. Suitable for laminates that require aggressive filling resistance and hot filling.
TEXACOTE SB 205/75 (NCO)
Mix ratio
100
TEXACOTE XP 5659 (OH)
Mix ratio
11
Two-component adhesive system suitable for pasteurisable, sterilisable and high thermal resistance structures. Suitable for all structures that include aluminium. In transparent structures, the high brightness provides excellent results. Suitable for very aggressive fillings as well as hot fillings.
TEXACOTE SB 237 (NCO)
Mix ratio
100
TEXACOTE CR 218 (OH)
Mix ratio
2
Two-component adhesive system suitable for lamination of ALU containing structures and films such as PE, OPP, CPP, PA, PET. Exhibits excellent green strength, rapid curing and low curling effect. Suitable in cases where high thermal and chemical resistances are required. Resistant to boiling, pasteurisation and sterilisation. The system is PAA free immediately after production.
TEXACOTE SB 229 (NCO)
Mix ratio
100
TEXACOTE CR 226 (OH)
Mix ratio
10
Two components high performance solvent-based adhesive system suitable for lamination of ALU containing structures and films such as PE, OPP, CPP, PA, PET. Shows excellent green strenght, fast curing and low curling effect. Provide high thermal and chemical resistances. The obtained wrappers are resistant to boiling, pasteurization and sterilization. Resistant in structures filled with very aggressive filling such as 3% acetic acid. PAA free after lamination.
TEXACOTE SB 202/50 (OH)
Mix ratio
100
TEXACOTE CR 200 (NCO)
Mix ratio
9
Two-components OH solvent-based, high performance adhesive system. Provides high chemical and thermal resistance. Exhibits excellent adhesion and high wettability. Suitable for structures involving ALU foil and all barrier films. Furthermore, it is suitable for making flexible packaging multi layers with high performance, such as sterilisation and chemical resistance.
TEXACOTE SB 241 (NCO)
Mix ratio
100
TEXACOTE CR 220 (OH)
Mix ratio
2
High performance solvent-based two component polyurethane adhesive with free isocyanate monomer < 0.1%. The system is suitable for lamination involving alu foils and the most commonly used plastic films. Exhibits excellent green strength, rapid curing, low curling effect, high thermal and chemical resistance. The system is resistant to boiling, pasteurisation and sterilisation. The laminates are PAA free immediately after production.
TEXACOTE SB 221 (NCO)
Mix ratio
100
Mix ratio
Mono component adhesive, suitable for lamination of paper and plastic films. In transparent structures, it exhibits excellent optical results.
TEXACOTE SB 275 (NCO)
Mix ratio
100
Mix ratio
The mono component adhesive is more suitable for ALU and metallised films.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 300/6 (OH)
Mix ratio
80
Two-component adhesive system suitable for lamination of the most commonly used plastic films such as BOPP, CPP, PET, PE, OPA, CPA and metallised. Its composition allows lamination at high speed, excellent substrate wettability and a rapid curing time. Resistant to boiling and pasteurisation in transparent structures.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 302 (OH)
Mix ratio
60
Two-component adhesive system with good chemical and thermal resistance, suitable for the lamination of the most commonly used plastic films, aluminium, and metallised films. Suitable for high-speed lamination, it has good wettability and rapid curing.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 300 (OH)
Mix ratio
50
Two-component adhesive system that allows lamination of a wide array of the most commonly used plastic films, metallised as well as aluminium. The adhesive has medium-high thermal and chemical resistances, allows rapid lamination speed and has rapid curing. It is resistant to boiling and pasteurisation in transparent structures.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 322 (OH)
Mix ratio
60
Medium performance, two-component solvent-free adhesive system suitable for lamination of printed and unprinted substrates, metallised, ALU foil and transparent films such as PE (including EVA and white), PP, PET and PA. The system exhibits excellent wettability and long pot-life in metering rollers. Resistant to boiling and pasteurisation in transparent structures. The adhesive is not suitable for aggressive fillings.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 332 (OH)
Mix ratio
50
Medium performance, two-component solvent-free adhesive system suitable for lamination of printed and unprinted substrates, metallised, ALU foil and transparent films such as PE (including EVA and white), PP, PET and PA. The system exhibits excellent wettability and good final bonding. Resistant to boiling and pasteurisation in transparent structures. The adhesive is not suitable for aggressive fillings.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 320 (OH)
Mix ratio
60
Two-component adhesive system that allows lamination of a wide array of the most commonly used plastic films, metallised as well as aluminium. The adhesive has good thermal and chemical resistance, allow rapid lamination speed and has rapid curing.
TEXACOTE SF 543 (NCO)
Mix ratio
100
TEXACOTE CR 342 (OH)
Mix ratio
50
Two-component adhesive system, medium to high performance with good chemical and thermal resistance, and allows lamination of all plastic films and aluminium. It can be used at high speed with rapid curing and very fast decay of primary aromatic amines (PAA).
TEXACOTE SF 390 (NCO)
Mix ratio
100
TEXACOTE CR 395 (OH)
Mix ratio
40
Two-component adhesive system with high resistance to aggressive filling and good “green-tack”, suitable for lamination of film/film and film/ALU structures, metallised films included. Structures produced with transparent films are also sterilisable. Laminate made with aluminium provides superior resistance to aggressive fillings, and thermal and mechanical resistance. Very rapid PAA decay time due to its chemical formulation.
TEXACOTE SF 390 (NCO)
Mix ratio
100
TEXACOTE CR 377S (OH)
Mix ratio
40
Two-component adhesive system that allows lamination at high speed with high resistance to aggressive filling and good “green-tack”, suitable for lamination of film/film and film/ALU structure, metallised films included. Structures produced with transparent films are also sterilisable. Laminate made with aluminium provides superior resistance to aggressive fillings, and thermal and mechanical resistance. Very rapid PAA decay time due to its chemical formulation (3 days).
TEXACOTE XP 2021_5107 (NCO)
Mix ratio
100
TEXACOTE CR 314S (OH)
Mix ratio
80
High performance solvent- free adhesive system designed for lamination of plastic films to other plastic film, metallized, ALU, intended for use in dry foodstuffs, liquids, boil-in-bag food, wet wipes. Shows excellent wettability and good final bonds. Resistant up to sterilization on film-film and provides excellent chemical resistances. It was studied to provide superior results for lamination of barrier substrates, reducing the issue of bubbling even at high speed.
TEXAGLOSS 402HV
Mix ratio
-
-
Mix ratio
-
Polyether based mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates.
TEXAGLOSS 400
Mix ratio
-
-
Mix ratio
-
Polyether based mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates.
TEXAGLOSS 437D
Mix ratio
-
-
Mix ratio
-
Mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates. The adhesive requires lower heating and application temperatures compared to other solutions.
TEXAGLOSS 437HV
Mix ratio
-
-
Mix ratio
-
Mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates. Highly suitable in cases of high paper porosity.
TEXACOTE HS 620
Mix ratio
-
-
Mix ratio
-
Lacquer specifically developed for heat sealing of PVC and PS substrates, it exhibits good sealing, excellent wettability and easy drying properties.
TEXACOTE XP 5833
Mix ratio
-
-
Mix ratio
-
Universal heat seal lacquer suitable for the most common substrates available on the heat sealing market, including mix-pap. It exhibits very high sealing force results with no need for a primer. Easy drying properties and excellent wettability on all the different substrates where is applied.
TEXACOTE HS 820
Mix ratio
-
-
Mix ratio
-
Universal heat seal lacquer suitable for the most common substrates available on the heat sealing market, including mix-pap. It exhibits very high sealing force results with no need for a primer. Easy drying properties and excellent wettability on all the different substrates where is applied. Lower viscosity for high solid applications, it is also suitable for water cup application where troublesome resistance conditions are encountered.
TEXACOTE XP 5926
Mix ratio
-
-
Mix ratio
-
Heat seal coating based on EVA-copolymer resin in organic solvents. Can be used at low sealing temperatures and it is used as a peelable in lidding stock.
TEXAFLEX 1420
Mix ratio
-
-
Mix ratio
-
Printable, mono component lacquer suitable for coating of metallised films.
TEXAFLEX 1424
Mix ratio
-
-
Mix ratio
-
Mono component overprint varnish with high gloss effect.
TEXAFLEX 1424 M
Mix ratio
-
-
Mix ratio
-
Mono component matt varnish suitable for external coating.
TEXAFLEX PRIMER 5819P - 5819H
Mix ratio
-
-
Mix ratio
-
Printable 2K lacquer suitable for coating of all metallised surfaces, from plastic films to soft and hard aluminium foil. High flexibility and light resistance, it can be also used as an overprint lacquer with high thermal resistance.
TEXACOTE 655A - 890C
Mix ratio
-
-
Mix ratio
-
2K matt varnish for plastic films with good scratch resistance and thermal resistance. Can be applied by rotogravure systems on different substrates such as PP, BOPP, PET corona treated and PE.
TEXACOTE SB 214 (OH)
Mix ratio
100
TEXACOTE CR 213 (NCO)
Mix ratio
100
Two-component adhesives with medium thermal resistance. The product has high wettability and low solvent retention, recommended for lamination at high speed.
TEXACOTE SB 275 (NCO)
Mix ratio
100
TEXACOTE CR 203 (OH)
Mix ratio
25
Two-component adhesive system which provides very good wettability and easy drying of solvents. Suitable with film containing high quantity of slip agent.
TEXACOTE SB 251 (NCO)
Mix ratio
100
TEXACOTE CR 209 (OH)
Mix ratio
2,5
Two-component adhesives with high thermal resistance. The resulting laminates can withstand boiling and pasteurisation. Sterilisation is possible only in film/film structures.
TEXACOTE SB 222/70 (OH)
Mix ratio
100
TEXACOTE CR 200 (NCO)
Mix ratio
11,5
Two-components OH solvent-based adhesive system with elevated chemical and thermal resistance. Suggested for PET/ALU structures involved in electrical cable insulation, but can also be used with other different plastic substrates. Adhesive suitable for structures such as PET/ALU, PET/ALU/PE, PET/ALU/CPP and all barrier film structures. The high, non-volatile portion of the system allows high concentration coating and application, including paper.
TEXACOTE SB 203 (NCO)
Mix ratio
100
TEXACOTE CR 203 (OH)
Mix ratio
20
Two-component adhesive system with high wettability of all substrates in film/film, film/ALU and film/metfilm lamination. The resulting laminates are boiling and pasteurisation resistant. Running prior trials for sterilisation applications is recommended. Suitable for hot filling applications.
TEXACOTE SB 205/75 (NCO)
Mix ratio
100
TEXACOTE CR 205 (OH)
Mix ratio
2,5
Two-component adhesive system suitable for pasteurisable, sterilisable/retortable structures. Suitable for lamination of all substrates containing aluminium, metallised and transparent films, owing to its high brightness features. Suitable for laminates that require aggressive filling resistance and hot filling.
TEXACOTE SB 205/75 (NCO)
Mix ratio
100
TEXACOTE XP 5659 (OH)
Mix ratio
11
Two-component adhesive system suitable for pasteurisable, sterilisable and high thermal resistance structures. Suitable for all structures that include aluminium. In transparent structures, the high brightness provides excellent results. Suitable for very aggressive fillings as well as hot fillings.
TEXACOTE SB 237 (NCO)
Mix ratio
100
TEXACOTE CR 218 (OH)
Mix ratio
2
Two-component adhesive system suitable for lamination of ALU containing structures and films such as PE, OPP, CPP, PA, PET. Exhibits excellent green strength, rapid curing and low curling effect. Suitable in cases where high thermal and chemical resistances are required. Resistant to boiling, pasteurisation and sterilisation. The system is PAA free immediately after production.
TEXACOTE SB 229 (NCO)
Mix ratio
100
TEXACOTE CR 226 (OH)
Mix ratio
10
Two components high performance solvent-based adhesive system suitable for lamination of ALU containing structures and films such as PE, OPP, CPP, PA, PET. Shows excellent green strenght, fast curing and low curling effect. Provide high thermal and chemical resistances. The obtained wrappers are resistant to boiling, pasteurization and sterilization. Resistant in structures filled with very aggressive filling such as 3% acetic acid. PAA free after lamination.
TEXACOTE SB 202/50 (OH)
Mix ratio
100
TEXACOTE CR 200 (NCO)
Mix ratio
9
Two-components OH solvent-based, high performance adhesive system. Provides high chemical and thermal resistance. Exhibits excellent adhesion and high wettability. Suitable for structures involving ALU foil and all barrier films. Furthermore, it is suitable for making flexible packaging multi layers with high performance, such as sterilisation and chemical resistance.
TEXACOTE SB 241 (NCO)
Mix ratio
100
TEXACOTE CR 220 (OH)
Mix ratio
2
High performance solvent-based two component polyurethane adhesive with free isocyanate monomer < 0.1%. The system is suitable for lamination involving alu foils and the most commonly used plastic films. Exhibits excellent green strength, rapid curing, low curling effect, high thermal and chemical resistance. The system is resistant to boiling, pasteurisation and sterilisation. The laminates are PAA free immediately after production.
TEXACOTE SB 221 (NCO)
Mix ratio
100
Mix ratio
Mono component adhesive, suitable for lamination of paper and plastic films. In transparent structures, it exhibits excellent optical results.
TEXACOTE SB 275 (NCO)
Mix ratio
100
Mix ratio
The mono component adhesive is more suitable for ALU and metallised films.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 300/6 (OH)
Mix ratio
80
Two-component adhesive system suitable for lamination of the most commonly used plastic films such as BOPP, CPP, PET, PE, OPA, CPA and metallised. Its composition allows lamination at high speed, excellent substrate wettability and a rapid curing time. Resistant to boiling and pasteurisation in transparent structures.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 302 (OH)
Mix ratio
60
Two-component adhesive system with good chemical and thermal resistance, suitable for the lamination of the most commonly used plastic films, aluminium, and metallised films. Suitable for high-speed lamination, it has good wettability and rapid curing.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 300 (OH)
Mix ratio
50
Two-component adhesive system that allows lamination of a wide array of the most commonly used plastic films, metallised as well as aluminium. The adhesive has medium-high thermal and chemical resistances, allows rapid lamination speed and has rapid curing. It is resistant to boiling and pasteurisation in transparent structures.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 322 (OH)
Mix ratio
60
Medium performance, two-component solvent-free adhesive system suitable for lamination of printed and unprinted substrates, metallised, ALU foil and transparent films such as PE (including EVA and white), PP, PET and PA. The system exhibits excellent wettability and long pot-life in metering rollers. Resistant to boiling and pasteurisation in transparent structures. The adhesive is not suitable for aggressive fillings.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 332 (OH)
Mix ratio
50
Medium performance, two-component solvent-free adhesive system suitable for lamination of printed and unprinted substrates, metallised, ALU foil and transparent films such as PE (including EVA and white), PP, PET and PA. The system exhibits excellent wettability and good final bonding. Resistant to boiling and pasteurisation in transparent structures. The adhesive is not suitable for aggressive fillings.
TEXACOTE SF 301 (NCO)
Mix ratio
100
TEXACOTE CR 320 (OH)
Mix ratio
60
Two-component adhesive system that allows lamination of a wide array of the most commonly used plastic films, metallised as well as aluminium. The adhesive has good thermal and chemical resistance, allow rapid lamination speed and has rapid curing.
TEXACOTE SF 543 (NCO)
Mix ratio
100
TEXACOTE CR 342 (OH)
Mix ratio
50
Two-component adhesive system, medium to high performance with good chemical and thermal resistance, and allows lamination of all plastic films and aluminium. It can be used at high speed with rapid curing and very fast decay of primary aromatic amines (PAA).
TEXACOTE SF 390 (NCO)
Mix ratio
100
TEXACOTE CR 395 (OH)
Mix ratio
40
Two-component adhesive system with high resistance to aggressive filling and good “green-tack”, suitable for lamination of film/film and film/ALU structures, metallised films included. Structures produced with transparent films are also sterilisable. Laminate made with aluminium provides superior resistance to aggressive fillings, and thermal and mechanical resistance. Very rapid PAA decay time due to its chemical formulation.
TEXACOTE SF 390 (NCO)
Mix ratio
100
TEXACOTE CR 377S (OH)
Mix ratio
40
Two-component adhesive system that allows lamination at high speed with high resistance to aggressive filling and good “green-tack”, suitable for lamination of film/film and film/ALU structure, metallised films included. Structures produced with transparent films are also sterilisable. Laminate made with aluminium provides superior resistance to aggressive fillings, and thermal and mechanical resistance. Very rapid PAA decay time due to its chemical formulation (3 days).
TEXACOTE XP 2021_5107 (NCO)
Mix ratio
100
TEXACOTE CR 314S (OH)
Mix ratio
80
High performance solvent- free adhesive system designed for lamination of plastic films to other plastic film, metallized, ALU, intended for use in dry foodstuffs, liquids, boil-in-bag food, wet wipes. Shows excellent wettability and good final bonds. Resistant up to sterilization on film-film and provides excellent chemical resistances. It was studied to provide superior results for lamination of barrier substrates, reducing the issue of bubbling even at high speed.
TEXAGLOSS 402HV
Mix ratio
-
-
Mix ratio
-
Polyether based mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates.
TEXAGLOSS 400
Mix ratio
-
-
Mix ratio
-
Polyether based mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates.
TEXAGLOSS 437D
Mix ratio
-
-
Mix ratio
-
Mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates. The adhesive requires lower heating and application temperatures compared to other solutions.
TEXAGLOSS 437HV
Mix ratio
-
-
Mix ratio
-
Mono component adhesive, suitable for lamination of printed, neutral and metallised plastic films with paper and paperboad substrates. Highly suitable in cases of high paper porosity.
TEXACOTE HS 620
Mix ratio
-
-
Mix ratio
-
Lacquer specifically developed for heat sealing of PVC and PS substrates, it exhibits good sealing, excellent wettability and easy drying properties.
TEXACOTE XP 5833
Mix ratio
-
-
Mix ratio
-
Universal heat seal lacquer suitable for the most common substrates available on the heat sealing market, including mix-pap. It exhibits very high sealing force results with no need for a primer. Easy drying properties and excellent wettability on all the different substrates where is applied.
TEXACOTE HS 820
Mix ratio
-
-
Mix ratio
-
Universal heat seal lacquer suitable for the most common substrates available on the heat sealing market, including mix-pap. It exhibits very high sealing force results with no need for a primer. Easy drying properties and excellent wettability on all the different substrates where is applied. Lower viscosity for high solid applications, it is also suitable for water cup application where troublesome resistance conditions are encountered.
TEXACOTE XP 5926
Mix ratio
-
-
Mix ratio
-
Heat seal coating based on EVA-copolymer resin in organic solvents. Can be used at low sealing temperatures and it is used as a peelable in lidding stock.
TEXAFLEX 1420
Mix ratio
-
-
Mix ratio
-
Printable, mono component lacquer suitable for coating of metallised films.
TEXAFLEX 1424
Mix ratio
-
-
Mix ratio
-
Mono component overprint varnish with high gloss effect.
TEXAFLEX 1424 M
Mix ratio
-
-
Mix ratio
-
Mono component matt varnish suitable for external coating.
TEXAFLEX PRIMER 5819P - 5819H
Mix ratio
-
-
Mix ratio
-
Printable 2K lacquer suitable for coating of all metallised surfaces, from plastic films to soft and hard aluminium foil. High flexibility and light resistance, it can be also used as an overprint lacquer with high thermal resistance.
TEXACOTE 655A - 890C
Mix ratio
-
-
Mix ratio
-
2K matt varnish for plastic films with good scratch resistance and thermal resistance. Can be applied by rotogravure systems on different substrates such as PP, BOPP, PET corona treated and PE.